123
 SALD 2201

SALD 2201

SALD-2201 – The Allrounder

Thanks to its wide measurement range and the high flexibility, the SALD-2201 is the ideal “workhorse” for particle measurements. It´s designed for all most all kinds of measurements and applications such as wet measurements, dry measurements, high concentration sample measurements, micro bubble measurement etc. . Thereby it takes just a few seconds to change between the optional accessories and to switch e.g. from a wet measurement to a dry sample and backwards.

Measurement principle: Laser diffraction (Mie solution, Fraunhofer approximation)
Measurement Range: 30nm – 1000 µm
 

Features:
Seamless measurements
Multifaceted analyses and evaluations
Measure concentrations from several ppm to 20%
Optional accessories for a wide variety of applications
Can be upgraded to a full system including wet and dry measurement devices
Calibration not required
A single light source, a single optical system and a single measurement theory of laser diffraction method can realize the perfect seamless and wide measuring range. There are no discontinuous points over the measuring range. Changes of particle size distribution can be monitored in real-time, because no switch of light sources can realize the short measurement time of 1 second.

Accessories:

Sampler units for wet measurements
With the sampler unit SALD-MS22 it´s possible to measure dispersed particles in the liquid.
SUS and fluororesins are used in the circulation passageways of Sampler Unit SALD-MS22, so that many organic solvents can be used. Also, when measurement with a small amount of organic solvent is desired, the batch cell SALD-BC22 can be selected.

High Concentrated Samples:

The high concentration kit HC-22 allows measurements of high concentrated samples by simply dispersing the high-concentrated sample between two glass slides. This shortens the length of the light path, avoids the negative effects of multiple scattering.

High performance dry measurements and easy switch between wet measurement and dry measurement
The Injection type Dry Measurement Unit SALD-DS21 can realize optimum dry measurements for various sample particles. Also, switch between wet measurement and dry measurement is very easy.

Injection type Dry Measurement Unit
(measuring range: approx. 0.8 to 1000um)

This unit measures the particle size distribution of a sample powder dispersed in the air. Use this unit for particle size distribution measurements of powders with no suitable dispersion medium and powders that dissolve in liquids. For measurements the sample powder is dispersed by injecting in the air from a nozzle. The unit offers three types of sample suction mechanism and three types of nozzle, which allow setting of the optimal dispersion force and sample volume conditions to match the sample state and aim of measurement. A separate dry-measurement detector case compressor and dust collector are required to use the dry measurement units.


 

SALD 2201

תואר
מכשור מדעי